Here you will find all currently available courses.

Scissor Lift VOC

The Scissor Lift Verification of Competency (VOC) course is aimed at participants who currently hold a Scissor Lift EWPA Yellow Card Operators Licence for a Scissor Lift (SL).

The course allows participants to prove to employers they are still competent in the safe operation of a Scissor Lift and that they have knowledge of current industry regulations.

Our fee is $220 per person for non-statement of attainment outcomes, or $300 per person for statement of attainment outcomes.

Condition 'B' Removal Training

The Condition B Removal course is aimed at heavy vehicle drivers who are currently restricted to driving vehicles with a transmission type of either automatic or synchromesh, and who wish to remove this restriction from their licence so that they can drive constant-mesh (road ranger) vehicles as well.

The course gives participants the training in a constant-mesh (road ranger) heavy vehicle that is required to have the condition 'B' on their licence removed, allowing them to drive heavy vehicles of any transmission type (automatic, synchromesh or constant-mesh).

Condition B Removal Costs $880 for the day when conducted in our vehicle. Any additional hours are charged at a reduced rate of $80 per hour.

Chain of Responsibility Training

The Chain of Responsibility (or CoR) courses are aimed at any party that works in the heavy vehicle transport supply chain. Whether you are a general employee or someone in a supervisory or middle-management role, you each have responsibilities to ensure the safety of all parties in the supply chain.

The first of our two courses gives participants the skills and knowledge of CoR features and requirements with regards to the Heavy Vehicle National Law and is geared towards general employess, while our CoR 2 course extends upon this knowledge delving into skills more suitable for those in supervisory roles.

CoR 1 Course Costs $295 per person

CoR 2 Course Costs $425 per person

Confined Space Training

The Confined Space course is aimed towards anyone who needs to enter and work in confined spaces as part of their day to day duties.

The course gives participants the skills and knowledge to plan and prepare for work in confined spaces, as well as how to safely undertake work in a confined space environment.

Confined Space Course Costs $295 per person.

Load Security Training

The Secure Cargo course is aimed at drivers in the transport industry who are required as part of their day to day duties to secure loads to the vehicles they drive.

The course gives participants the skills and knowledge required of a heavy vehicle operator when undertaking the task of loading and unloading goods/cargo and securing goods/cargo for transport.

Secure Cargo Course Costs $345 per person.

Provide First Aid

The Provide First Aid course is conducted in Newcastle, and is aimed at anyone who wishes to learn about first aid as well as how to correctly administer CPR.

The course gives participants the skills and knowledge to Provide First Aid in various situations that may be encountered in both everyday life and the workplace.

Provide First Aid Costs $130 per person.

Complete A Work Diary

The complete a work diary in the road transport industry course is aimed at drivers in the transport industry who drive a fatigue-regulated vehicle and need to carry and complete a National Driver Work Diary.

The course gives participants the skills and knowledge to accurately complete their work diary, as well as comply with the legislative and regulatory requirements of a work diary.

Complete a Work Diary Costs $275 per person.

EWP VOC

The EWP Verification of Competency (VOC) course is aimed at participants who currently hold an above 11-meter boom type EWP licence (high risk work licence of class WP).

The course allows participants to prove to employers they are still competent in the safe operation of a boom type EWP and that they have knowledge of current industry regulations.

Our fee is $220 per person for non-statement of attainment outcomes, or $300 per person for statement of attainment outcomes.

SafeWork NSW White Card Training

The SafeWork NSW White Card Course (WHS General Construction Induction Certificate) is a mandatory requirement for anyone wanting to enter or work on construction sites in NSW.

The course covers selecting and fitting correct personal protective equipment (PPE) as well as how to identify construction hazards, implement risk control measures, and procedures for identifying and responding to potential emergencies and incidents in a construction environment.

Full course costs $120 per person.

Light Rigid Truck/Bus Training and Assessing

The LR training and assessment takes approximately 1 day to complete and is intended for persons who wish to drive a rigid truck, or bus that seats more than 12 adults including the driver, with two (2) axles and GVM up to 8 tonnes.

Light Rigid (LR) truck training costs $1000 - as a one day course when conducted in our vehicle. Any additional hours are charged at a reduced rate of $80 per hour.

Forklift VOC

The forklift Verification of Competency (VOC) course is aimed at participants who currently hold a forklift licence.

The course allows participants to prove to employers they are still competent in the safe operation of a forklift and that they have knowledge of current industry regulations.

Our fee is $220 per person for non-statement of attainment outcomes, or $300 per person for statement of attainment outcomes.

Multi Combination Licence

Multi Combination (MC) training and assessment takes one (1) day if you're coming from a Heavy Combination Licence, and two (2) days from a Heavy Rigid Licence.

This course is for anyone who wants to drive B-doubles; Prime mover, low loader dolly and low loader trailer combinations; or road trains.

Upgrading from a HR Licence costs $3000, and upgrading from a HC Licence costs $1750

Work Safely at Heights

The Work Safely at Heights (RIIWHS204D) course takes approximately six (6) hours to complete and is intended for anyone needing to work at heights for example, riggers, construction workers, or operators of Elevated Work Platforms.

The course includes identifying possible risks and hazards, accessing and installing appropriate equipment, selecting reliable anchor systems, and cleaning up the work area.

Full Course Cost is $250 per person.

Bus Driver Authority

The Bus Driver Authority course takes approximately four (4) hours to complete and is intended for anyone wanting the qualifications to drive a public passenger vehicle.

This course is a legal requirement for all drivers of public passenger bus, motorcycle and 4-wheel drive tour vehicles to be authorised under the Passenger Transport Act 1990.

Full Course Cost is $385 per person.

Heavy Combination Truck Training and Assessing

HC training and assessment takes approximately 17 hours to complete and is intended for persons who wish to drive an articulated truck with three (3) or more axles.

i.e Prime mover with single semi trailer, or heavy rigid vehicle towing a GVM more than nine (9) tonnes. Heavy Combination (HC) truck training costs $2040 for 2 days when conducted in our vehicle. Any additional hours are charged at a reduced rate of $80 per hour.

Heavy Rigid Truck Training and Assessing

The HR training and assessment generally takes approximately 17 hours to complete and is intended for persons who wish to drive a rigid truck with three (3) or more axles.

Heavy Rigid (HR) truck training costs $1870 for 2 days when conducted in our vehicle. Any additional hours are charged at a reduced rate of $80 per hour.

Medium Rigid Truck Training and Assessing

The MR training and assessment generally takes approximately 10 hours to complete and is intended for persons who wish to drive a rigid truck with two (2) axles and GVM over 8 tonnes.

Medium Rigid (MR) truck training costs $1000 for the day when conducted in our vehicle. Any additional hours are charged at a reduced rate of $80 per hour.

Forklift Licensing

The Forklift Licence takes three (3) days to complete and is intended for persons who wish to obtain a Forklift Licence to operate a Forklift Truck.

Full Forklift Licence costs $450 + $75 for the licence application fee with Australia Post.

Order Picker Forklift Licensing

The Order Picker Forklift Licence takes two (2) days to complete and is intended for persons who wish to obtain an Order Picker Forklift Licence (Class LO).

Full Forklift Licence costs $570 + $75 for the licence application fee with Australia Post.

Elevated Work Platform Licensing

The Elevated Work Platform (EWP) course takes two (2) days to complete and is intended for individuals who wish to obtain a licence to operate a boom-type Elevated Work Platform, with a boom length of 11 meters or more.

Full EWP Licence costs $600 + $75 for the licence application fee with Australia Post.

Scissor Lift Yellow Card

The Scissor Lift Yellow Card course takes 1 day (6 hours) to complete and is intended for persons who wish to gain the skills to operate a scissor lift.

The course provides suitable proof of training to allow a person to operation a scissor lift

Full Scissor Lift Yellow Card Course costs $330 per person.

NSW - Sydney, & Newcastle Dangerous Goods Licensing

The Dangerous Goods Licence takes two (2) days to complete and is intended for persons who wish or are required by law to obtain a Dangerous Goods Drivers Licence.

NSW Dangerous Goods Licence costs $395 + the licensing fee with NSW Environment Protection Authority (EPA).

QLD - Brisbane Dangerous Goods Licensing

The Dangerous Goods Licence takes two (2) days to complete and is intended for persons who wish or are required by law to obtain a Dangerous Goods Drivers Licence.

Brisbane Dangerous Goods Licence costs $425

Safe Load Program

The Safe Load Program (SLP) course takes approximately four (4) hours to complete and is intended for anyone needing to enter a petroleum transport facility to load bulk petroleum. This course provides generic introductory training for drivers entering oil industry terminals and depots.

Full Course Cost is $295 +$150 for SLP

Dangerous Goods Awareness

The Dangerous Goods Awareness course takes 1 day to complete and is intended for anyone who may handle dangerous goods and/or hazardous substances.

Full Dangerous Goods Awareness Costs $325.

Driver Fatigue Management Course

The 'Apply fatigue management strategies' course takes approximately 6 hours to complete and is intended for persons who require the knowledge and skills to apply fatigue management strategies to reduce fatigue during working activities.

Full Course Cost $275.

Manual Handling Course

The Manual Handling Course takes approximately three (3) hours and is intended for individuals who manually handle heavy objects at work. It covers basic principles of safe manual handling techniques when shifting materials on a day to day basis.

Full Course Cost $275.

EWP Hire

When not being used for training our above 11 meter truck mounted EWP is available for hire with a fully qualified and capable operator. The operator is not only there to safely control the EWP, but also to help however they can with the job at hand.

EWP Day Rate Hire: $1200 (inc GST).

We are currently working hard on making additional courses available. Stay tuned to this website, or follow us on Facebook for the most updated list of available courses.